Status - TRENDnet TEW-753DAP User Manual

TEW-753DAP User's Guide
Spanning Tree Status: Enable or disable 802.1d spanning tree
protocol to avoid network looping
Bridge Hello Time : The time between each bridge protocol
data unit (BPDU). Default: 2 sec.
Bridge Max Age : Maximum time a BPDU kept in bridge.
Default: 20 sec.
Bridge Forward Delay : The time spend in listen and learning
state. Default: 4 sec.
Priority : Priority number for root bridge selection.
(MAC number is listed on Status > Main
page)
Apply : Click this button to save and activate
Cancel : Click this button to abandon the change
Band Steer
The TEW-753DAP equipped with 2.4GHz and 5GHz wireless interfaces.
When your client device can work on both 2.4GHz and 5GHz wireless,
Band Steer can redirect your 2.4GHz crowded traffic to 5GHz band
automatically. To setup band steer, you have to setup the same SSID on
both 2.4GHz and 5GHz. Then check enable band steering on this page.
Click Save�
© Copyright 2013 TRENDnet. All rights reserved.
System Configuration
Save : Click this button to save the change.
(Save & Reload is required to take effect.)
Cancel : Click this button to abandon the change
21