Rear Panel - Planet GSD-1020 User Manual

1000Base-T
LED Color
ACT Green
1000/100 Green
Orange
FDX Green

2.2 Rear Panel

The rear panel of the Switch indicates an AC inlet power socket which accepts input power from 100 to
240VAC, 50-60Hz.
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should
active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will
prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your switch from being
damaged by unregulated surge or current to the Switch or the power adapter.
Lit: indicate that the switch is actively sending or receiving data
over that port.
Lit: indicate that connection made through the corresponding port
is running at 1000Mbps.
Lit: indicate that connection made through the corresponding port
is running at 100Mbps.
Lit: indicate that the connection made through the corresponding port is
running in Full Duplex mode.
Blink: indicate that the connection is experiencing collisions
Figure 2: GSD-1020 Switch rear panel
Function
- 3 -