Description - Hilti SD 5000 Operating Instructions Manual

Obligation signs
Wear eye
protection
en
Symbols
Read the
operating
instructions
before use
Watts
Revolutions
per minute

2. Description

2.1 Use of the product as directed
The SD 5000 is a hand-held, mains-powered electric tool for use in drywall installation.
The SD 2500 is a hand-held, mains-powered electric tool for use in timber construction and drywall installation.
These power tools are designed for driving and removing the recommended screws in materials of the
corresponding type and thickness.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Modification of the power tool or tampering with its parts is not permissible.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Nationally applicable industrial safety regulations must be observed.
16
Downloaded from www.Manualslib.com
Printed: 07.07.2013 | Doc-Nr: PUB / 5070555 / 000 / 00
Wear ear Wear
protection protective
gloves
Return waste Volts
material for
recycling.
Hertz Alternating
current
Diameter Double
insulated
manuals search engine
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Serial no.:
Amps
Rated speed
under no load