Removing The Feed Motor Assembly; Removing The Spindle Motor Assembly - JVC NX-D7UX Service Manual

3.2.3 Removing the feed motor assembly

(See Fig.10)
(1) Remove the one screw F attaching the feed motor assem-
bly.
(2) Remove the feed motor wires from solder part of spindle
motor board.
Solder part
Middle gear
Lead screw
F
Fig.10

3.2.4 Removing the spindle motor assembly

(See Fig.11)
(1) Remove the three screws G attaching the spindle motor
from spindle motor board.
G
Spindle motor
Fig.11
(No.MB711<Rev.002>)1-15