Disassembly; Removing The Rear Panel - JVC NX-D7UX Service Manual

3.1 Main body (Used figure are NX-D7)
3.1.1 Removing the Top cover (See Fig.1, 2 and 3)
(1) Remove the five screws A and one screw B attaching the
Side panel. (See Fig.1)
A
(2) Remove the six screws C attaching the both side of the
Side panel and then side to backward to remove the Side
panel. (See Fig.2)
C
1-8 (No.MB711<Rev.002>)
SECTION 3

DISASSEMBLY

A
Fig.1
Fig.2
(3) Disengage two hooks a engaged both side of the Top cov-
er. (See Fig.3)
B
3.1.2 Removing the Rear panel (See Fig.4, 5)
(1) Disconnect the card wire from Tuner pack connected to
connector CN306
(2) Disconnect the connector wire from FAN connected to con-
nector CN303
a
hook
Fig.3
of the Main board. (See Fig.4)
of the Main board. (See Fig.4)
Fig.4
CN303
CN306