Removing The Feed Motor Assembly; Removing The Spindle Motor Assembly - JVC UX-G68E Service Manual

3.2.3 Removing the feed motor assembly

(See Fig.12)
(1) Remove the one screw G attaching the feed motor assem-
bly.
(2) Remove the feed motor wires from solder part of spindle
motor board.

3.2.4 Removing the spindle motor assembly

(See Fig.13)
(1) Remove the two screws H attaching the spindle motor from
spindle motor board.
1-18 (No.MB595)
Splder part
Middle gear
Lead screw
Fig.12
H
Fig.13
G
Spindle motor