Removing The Front Panel Assembly - JVC MX-GA77 Service Manual

MX-GA77
CW105

Removing the front panel assembly

Prior to performing the following procedure, remove
the metal cover and CD changer unit.
1. Disconnect the card wire from the connector CW101
on the main board.
2. Disconnect the harness from the connector CW108,
CW109 and CW110 on the main board.
3. Remove the screw E fixiing the lug wire.
4. Remove the two screws F attaching the front panel
assembly to both sides of the body.
5. Remove the screw G attaching the main board to the
front panel assembly.
6. Remove the screw H attaching the front panel
assembly to bottom of the body.
7. Release the two joints1 and two joints2, and detach
the front panel assembly toward the front.
1-6
CD board
CD changer unit
CW104
Main board
Fig.5
(See Fig.8 to 10)
Front panel
assembly
CD changer unit
D
(both sides)
Front panel
assembly
CW101
CW109
CW110
Joint1
(both sides)
F
(both sides)
Fig.8
Main board
Fig.9
C
Rear panel
Fig.6
Rear panel
Fig.7
Main board
ACW1
ACW2
CW108
Amp. board
E
(fixing the lug wire)
Front panel
assembly
G
Joint1
(both sides)
F
(both sides)