Install the bezel
Figure 19 Adjusting the position of the CMA
4. Organize the cables as needed.
Figure 20 Cables organized on CMA
Procedure
1. Depress the two handhold positions.
2. Push the bezel into place on the front of the chassis, making sure the handhold
locks click into place.
Figure 21 Front bezel
Note
The bezel contains a lock and is shipped with a key. If desired, lock the bezel
l
in place.
Push on the two handhold positions to remove the bezel as needed.
l
System Installation and Setup Guide
Install the bezel
19