Rack And Install - EMC VNXe3200 Installation Manual

CHAPTER 3

Rack and install

EMC recommends installing the disk processor enclosure (DPE) in the lowest available
location in a cabinet and then installing any optional disk-array enclosure (DAEs) above
the DPE.
CAUTION
The enclosures are heavy and should be installed into or removed from a rack by two
people. To avoid personal injury and/or damage to the equipment, do not attempt to lift
and install an enclosure into a rack without a mechanical lift and/or help from another
person.
Install the DPE rails............................................................................................... 16
l
Install the disk processor
l
Installing the disk processor
l
Install the DAE rails............................................................................................... 22
l
Install the disk array
l
Cabling the DPE to a
l
Cable the DPE to DAE.............................................................................................28
l
Attach the storage processors to the
l
Power up............................................................................................................... 32
l
Verify status LEDs..................................................................................................35
l
Attach the bezels.................................................................................................. 37
l
enclosure...................................................................... 20
enclosure................................................................. 21
enclosure..............................................................................26
DAE....................................................................................... 27
network........................................................ 31
Rack and install 15