Disk Drives; Back Panel - EMC CloudBoost 100 Installation And Setup Manual

Disk drives

Back panel

Figure 2 Disk and system LEDs
1. System fault LED (square shaped).
2. System power LED (square shaped).
3. Disk drive LEDs (triangular shaped).
Table 4 Indicator states
Part
System fault
System power
Disk drive status
When the bezel is affixed, the blue system power LED can be seen through the bezel.
The system contains up to 12 hot-swappable 3.5" HDD SAS disk drives, located in the
front of the chassis. Left to right, drives are numbered 0-3 in the top row, 4-7 in the
middle row, and 8-11 in the bottom row.
The base configuration contains 7 disk drives in locations 0 through 6. Drive bays
l
7-11 contain bay blanks.
The expanded configuration contains 12 disk drives.
l
Figure 3 Features on rear of chassis
State
Normally unlit. Amber indicates fault.
Steady blue indicates normal power.
Steady blue or blinking blue indicates normal operation. Amber
indicates fault or failure.
System Installation and Setup Guide
Back panel
7