Dial Plan Management Commands - Planet VIP-050 User Manual

Size of the Voice Information Field (VIF), in bits, for a voice coder are related to the coding type and
the rate the voice coder samples a voice frame (the packet time), as shown in the table above.
sizes of a coder of values other than those shown in the table are not valid.

6.11 Dial Plan Management Commands

Among the command sets supported by the CLI, the dial plan management commands are the
most sophisticated. Some of the dial plan management commands are only allowed when VIP is in
the atpm table update state. For ease of explaining, this command set is further categorized into
several sub command sets.
Sub command set
Database update
control
Destination table
management
Hunt group table
management
Address table
management
System
The following sections describe each sub command set and the commands.
52
Purposes
Ÿ Instruct VIP to start or stop
atpm table update state.
Store/restore atpm tables
Ÿ
to/from non-volatile storage
Ÿ Purge atpm tables
Erase dial plan database
Ÿ
from non-volatile storage
Manage atpm destination table
Manage atpm hunt group table
Manage atpm address table
Manage atpm system configura-
tion
atpm table up-
date state re-
Commands
quired?
atpm req No
atpm done No
atpm re- Yes
store No
atpm store Yes
atpm purge No
atpm erase
atpm dadd Yes
atpm ddel Yes
atpm dfind No
atpm dlist No
atpm hadd Yes
atom hdel Yes
atpm hfind No
atpm hlist No
atpm aadd Yes
atpm adel Yes
atpm afind No
atpm alist No
atpm slist No
atpm sys Yes
Command Line Interface
VIP User's Manual
VIF