Planet VIP-050 User Manual page 50

HTTP server =
Telnet server =
******************************************************
ITG>
net show hwstat
The net show hwstat command displays the hardware configuration of VIP.
Syntax Description
This command has no arguments or keywords
Example
The following example shows how to display hardware configuration:
ITG>net show hwstat <Enter>
****************** Hardware Configuration ******************
Flash: type-MX29L1611 32 sectors 64 KB/sector
RAM: 8 MB 512K x 16
LAN: 100 Mbps half duplex. Link UP
TIM slot A: type-FXO2S2 DSP-C5409 codec-PEB2466 Diag-OK
************************************************************
ITG>
net set pppoe
The net set pppoe command configures PPPoE related parameters while VIP is deployed in
PPPoE environment.
Syntax Description
on
off
username
password
fix_ip
net set dhcp
net set dhcp command configures VIP to be DHCP client in order to obtain TCP/IP related pa-
rameters from ISP while VIP is deployed in DHCP environment.
Syntax Description
42
enabled
enabled
Turn on PPPoE client
Turn off PPPoE client
PPPoE connection username provided by ISP
PPPoE connection password provided by ISP
Fixed IP address provided by ISP
VIP User's Manual
Command Line Interface