Planet VIP-050 User Manual page 53

SIP Voice Gateway User's Manual
show sip
The show SIP command displays the settings of the parameter that are related to SIP signaling
protocol.
Syntax Description
This command has no arguments or keywords
Example
The following example shows how to display the SIP parameters:
ITG>show sip
SIP Addr Configuration:
UDP ctl addr
RTP data addr
Domain name server = 168.95.192.1
Info switch is off
nat_call is on
auto_reg is off
outboundproxy : None
show sip reg
- Displays the information of registration
show sip cfg
- Displays the configuration of registration
show sip proxy
- Displays the configuration of proxy server
show sip dns_ip
- Displays the configuration of DNS server
show sip info_sw
- Displays the information switch
show sip auto_reg
- Displays auto-registration on/off when reboot
Command Line Interface
= 192.168.0.99/5060
= 192.168.0.99/2070
45