Telephone Operation; Console Operation; Line Indicators; Making And Ending A Call - VTech AM18447 User Manual

Telephone operation

Console operation

The console comes programmed to select a line automatically for calls when
you do not press a line key. To override the automatic line selection setting,
see Primary line on page 44 for details. When you answer a call, the console
automatically selects the ringing line.

Line indicators

Each of the four indicators on LINE 1-LINE 4 indicate
the state of the corresponding telephone line.
• On when the corresponding line is in use.
• Flashes slowly when the line is on hold.
• Flashes quickly when there is a transferred call on
the corresponding line.
• Flashes quickly when there is an incoming auto attendant transferred call on
the corresponding line.
• Flashes quickly when there is an incoming call on the corresponding line.

Making and ending a call

To make a call using the console:
Lift the handset or press SPEAKER
1.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
2. Wait for a dial tone, then enter the telephone number. The screen displays
the elapsed time as you talk (in hours, minutes and seconds).
To end a call using the console:
• Place the handset on the console to hang up.
-OR-
If you are using the speakerphone, press SPEAKER
•
NOTE: The elapsed time is not affected by accessing services from your telephone
service provider.
.
49
to hang up.