SCC MAM–200 Operation Manual page 9

In this menu the first data bit of password blinking, press
Press move the cursor to the next data bit, modify the second data bit of password in accordeance with the above.
Modify the the third and fourth data of password in sequence, press
switch to the following menu after verification.
The upper right corner with "*"
indicates the system verification
of the password
In the menu above press
present data in accordance with the above method. Press
sequence. When finished press
modification.
04.08.2017
BLOCK LOAD P:
BLOCK UNLOAD P: 0.6MPa
FAN START T:
FAN STOP T:
, the first data of LOADING P start to blink, user can press
to confirm and save the data. Other CUSTOMER PARAMETER share the similar way for
Operation Manual MAM - 200 V1.0
or to modify the first bit of password.
to confirm the input data and the menu will
0.8MPa *
80℃
70℃
to move to next data bit and modify the target data in
or to modify the
9