Troubleshooting - SCC MAM–200 Operation Manual

6 Troubleshooting

Failure stop caused by the external parts of controllers may be removed by checking this fault or history fault,
method is shown as below.
Press or
Press to move the cursor to "CURRENT FAULT"
Then press
Check the temperature sensor to confirm if there is any line broken or damage.
04.08.2017
to move the cursor to "RUN PARAMETER", then press
MOTORS CURRENT
TOTAL RUN TIME:
CURRENT RUN TIME
MAINTENANCE
HISTORY FAULT
PROD. DATE/NUM
CURRENT FAULT
to reach the following failure cause:
Temperature sensor Failure
170℃
Operation Manual MAM - 200 V1.0
to switch to secondary menu
18