SCC MAM–200 Operation Manual page 2

Please read all the operation manual before operating the set and keep this manual for further reference.
Installation of MAM—8** compressor controller can be performed only by professional technicians.
RC snubber must be connected to the two terminals of coil (such as AC contactor, valve, etc),which are controlled
by relay output.
Port connection shall be inspected carefully before power on.
PARAMETER is not allowed to be modified in running and stop delay status. Only user
parameter is allowed to be changed at running status
04.08.2017
Notice
Operation Manual MAM - 200 V1.0
2