Display
General
The display is used to select or set the
following:
– the programme
– any Extras
– the Delay start function
– the
Settings
menu
– information
The display can show the following:
– the programme name
– the stage the programme is at
– the current time of day and the date
– the estimated time left for the
programme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensors during this
time.
To switch the dishwasher back on
again, press the sensor.
Guide to the appliance
A dash in the display next to a sensor
indicates that a function can be
selected with that sensor. The relevant
sensor lights up.
The scroll bar on the right of the
display indicates that more options or
more text are available which can be
displayed by touching the relevant
illuminated sensor.
A dotted line will appear under the last
option available.
Touch the sensor next to
a message or setting and also to move
to the next menu or another menu level.
A tick will appear beside the option
which is currently selected.
To exit a sub-menu, touch the
sensor.
If you do not press any of the sensors
for several seconds, the display will
return to the previous menu level. You
may need to enter your settings again.
The
Settings
menu is used to alter
the dishwasher's electronics to suit
different requirements (see "Settings
menu").
OK
to confirm
7