Settings menu
Volume
A sequence of audible tones will sound
at the end of the programme or if there
is a fault as long as the buzzer has been
activated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault cannot be deactivated.
Buzzer at the end of a programme
The buzzer at the end of a programme
will sound four times at intervals with a
short pause between each set of tones.
Buzzer tones
The volume of the tone at the end of the
programme can be selected in seven
stages or switched off.
Select the volume you want using the
Quieter
and
Louder
the buzzer off.
Confirm with
OK
Night time buzzer tone
You can select a different volume for
the buzzer at night, or switch it off.
Select the volume you want for the
night time buzzer using the
and
Louder
options, or switch the
night time buzzer off.
Confirm with
OK
108
options, or switch
.
Quieter
.
Night time
You can select the times for night time
to begin and end.
Select the
Start at
Use
+/-
to set the time in hours and
minutes for the night time to begin
and confirm both with
Select the
Finish at
Use
to set the time in hours and
+/-
minutes for the night time to end and
confirm both with
Keypad tone
An audible tone sounds each time a
sensor is pressed.
The volume for the keypad tone can be
set in seven stages, or switched off.
Select the volume you want using the
Quieter
and
Louder
the keypad tone off.
Confirm with
OK
option.
OK
.
option.
.
OK
sensors, or switch
.