Before using for the first time
Water hardness
The display will change to the screen
for setting the water hardness.
– The dishwasher must be
programmed to the correct water
hardness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °d - German scale), always
programme the dishwasher to the
higher value (2.7 mmol/l or 15 °d in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________mmol/l
The dishwasher is programmed at the
factory for a water hardness level of 0.2
mmol/l (1 °d - German scale).
Select the water hardness level for
your water supply and confirm with
.
OK
See "Settings menu - Water hardness"
for more information.
24
Finally, prompts will appear in the
display.
After confirming this with
prompts
Insufficient salt
Insufficient rinse aid
Add salt and rinse aid if necessary
(see "Before using for the first time -
Dishwasher salt" and "Rinse aid").
Confirm the messages with
The display will change to show the
main menu.
OK
, the
and
may appear.
.
OK