Memory; Check Filters; Automatic - Miele HG05 Operating Instructions Manual

Memory

With the Memory function activated, the
dishwasher will save the last
programme selected.
When you switch the dishwasher off
and back on again, the last programme
selected will appear in the display
instead of the ECO
 Select the setting you want and
confirm with
OK
Switching off the refill
reminders
If you only ever use multi-function
combination products containing salt
and rinse aid in your dishwasher, you
can switch the refill reminders for salt
and rinse aid off if you wish. Doing so
will not affect the DetergentAgent
function (see "Programme options -
DetergentAgent").
 Select the setting you want and
confirm with OK
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
switch the reminders back on.
programme.
.
.

Check filters

You can adjust the interval at which the
message to remind you to check the
filters appears.
You can set an interval of between 30
and 60 programme cycles.
The "Check filters" message is set at
the factory to appear after every 50
programme cycles.
 Select the interval you want and
confirm this with

Automatic

You can adjust the
programme so that it will remove
stubborn soiling from a lightly soiled
load. Energy consumption will increase
with this option.
 Select the setting you want and
confirm with
OK
Settings menu
OK .
Automatic
.
109