Miele HG05 Operating Instructions Manual
Hide thumbs
Also See for HG05:
- Operating instructions manual (116 pages) ,
- Operating instructions manual (100 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele HG05
Summary of Contents for Miele HG05
-
Page 1: Operating Instructions
To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. en-GB HG05 M.-Nr. 09 645 520... -
Page 3: Table Of Contents
Contents Guide to the appliance................... 6 Appliance overview....................6 Control panel......................7 Display........................8 Warning and Safety instructions................9 Caring for the environment................. 18 Disposal of the packing material................18 Disposing of your old appliance................18 Energy saving washing..................19 EcoFeedback consumption indicator.............. - Page 4 Contents At the end of a programme..................46 Switching off......................47 Unloading the dishwasher..................47 Interrupting a programme..................48 Changing a programme..................48 Programme options..................... 49 Extras........................49 DetergentAgent...................... 50 Delay start with EcoStart..................51 Programme overview................... 54 Further programmes....................58 Cleaning and care....................
- Page 5 Contents Plumbing....................... 80 The Miele waterproof anti-leak system..............80 Connection to the water supply................80 Drainage......................... 82 Technical data...................... 83 Settings menu...................... 84 Open the Settings menu..................84 Language ......................84 Time........................85 Date........................85 Water hardness...................... 86 Rinse aid........................ 87 Consumption (EcoFeedback).................
-
Page 6: Guide To The Appliance
Guide to the appliance Appliance overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual compartment detergent dispenser e Air inlet for drying (depending on model) k Salt reservoir... -
Page 7: Control Panel
Guide to the appliance Control panel a On/Off sensor d Display See "Display" for further information. For switching the dishwasher on and off. e Back sensor b Information sensor For navigating back to the previous menu or deleting values which have For displaying additional information been set previously. -
Page 8: Display
Guide to the appliance Display A dash in the display next to a sensor indicates that a function can be General selected with that sensor. The relevant sensor lights up. The display is used to select or set the following: The scroll bar ... -
Page 9: Warning And Safety Instructions
Keep the installation plan and the operating instructions in a safe place and pass them on to any future owner. Miele cannot be held liable for damage caused by non- compliance with this information. - Page 10 Warning and Safety instructions Correct application This dishwasher is intended for use in domestic households and similar working and residential environments. The dishwasher is not intended for outdoor use. It must only be used as a domestic appliance as specified in these operating instructions, for cleaning domestic crockery and cutlery.
- Page 11 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. Children 8 years and older may only use the dishwasher unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
- Page 12 Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged dishwasher is dangerous. Check it for any visible damage. Never install or attempt to use a damaged appliance.
- Page 13 30 and 1000 kPa (0.3 and 10 bar). If the dishwasher gets damaged, switch it off at the mains immediately and call your Miele Dealer or the Miele Service Department. While the appliance is under guarantee, repairs should only be undertaken by a Miele authorised service technician.
- Page 14 During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply. If the connection cable is damaged it must be replaced with a special cable of the same type (available from Miele) by a Miele authorised service technician only.
- Page 15 Warning and Safety instructions Correct installation The dishwasher must be installed and connected in compliance with the installation diagram supplied. Take care, both before and during installation of the dishwasher, not to cut yourself on the metal parts. Danger of injury.
-
Page 16: Correct Use
Warning and Safety instructions Correct use Do not use solvents in the dishwasher. Danger of explosion. Do not inhale or ingest dishwasher detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth and throat if swallowed, or inhibit breathing. - Page 17 Please observe the information given in "Technical data" regarding the capacity of the dishwasher. Accessories Only use genuine original Miele accessories and spare parts with this dishwasher. Using accessories or spare parts from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
-
Page 18: Caring For The Environment
Caring for the environment Disposal of the packing Disposing of your old material appliance The packaging is designed to protect Electrical and electronic appliances the appliance from damage during often contain valuable materials. They transportation. The packaging materials also contain materials which, if handled used are selected from materials which or disposed of incorrectly, could be are environmentally friendly for disposal... -
Page 19: Energy Saving Washing
Caring for the environment Energy saving washing This dishwasher is exceptionally economical in its use of water and electricity. You can make the most of your appliance by following these tips: – For most economical dishwashing, make full use of the baskets without overloading the dishwasher. -
Page 20: Ecofeedback Consumption Indicator
Caring for the environment EcoFeedback consumption 2. Actual consumption indicator At the end of the programme you can call up the actual amount of energy and function is used for Consumption water used by the programme which calling up information about the energy has just been run. -
Page 21: Before Using For The First Time
Before using for the first time Opening the door Water in the dishwasher may be hot. Danger of scalding. At the end of programmes with a drying phase (see "Programme chart"), the Only open the door during operation door will open automatically a little in if absolutely necessary and exercise order to help the drying process. -
Page 22: Closing The Door
Before using for the first time Closing the door Safety lock Push the baskets right in. Use the safety lock to prevent children opening the dishwasher door. Raise the door upwards until the catch engages. The door will then close automatically. ... -
Page 23: Basic Settings
Before using for the first time Basic settings Time The display will then change to the Switch the dishwasher on using the screen for setting the time. sensor. The time of day needs to be set before The welcome screen will appear when programme option can Delay start the dishwasher is switched on for the... - Page 24 Before using for the first time Water hardness The message Set up successfully will then appear in the completed The display will change to the screen display. for setting the water hardness. After confirming this with , the – The dishwasher must be prompts ...
-
Page 25: Before Using The Appliance For The First Time, You Require
Before using for the first time Before using the appliance for If the water in your area is very soft the first time, you require: and constantly lower than 0.9 mmol/l (5 °d - German scale) you do not – approx. 1 kg dishwasher salt, have to add dishwasher salt. -
Page 26: Adding Salt
Before using for the first time Adding salt Do not fill the reservoir with water. When filling the salt reservoir only open the door halfway to ensure that all the salt gets into the reservoir. Add salt only until the reservoir is full or until water runs out of the opening. -
Page 27: Add Salt Reminder
Before using for the first time Add salt reminder If you only ever use combination products containing salt and rinse aid Fill the salt reservoir with dishwasher in your dishwasher, you can switch salt for reactivation when the reminders off if you wish (see appears. -
Page 28: Rinse Aid
Before using for the first time Rinse aid If you only ever use combination products containing rinse aid in your Rinse aid is necessary to ensure water dishwasher, you do not need to add does not cling and leave marks on rinse aid. -
Page 29: Add Rinse Aid Reminder
Before using for the first time Add rinse aid reminder When the Insufficient rinse aid message appears, the reservoir contains sufficient rinse aid for 2 - 3 programmes only. Add rinse aid in plenty of time. Confirm with OK. The message will go out. -
Page 30: Loading The Dishwasher
Loading the dishwasher Notes – The spray arms must not be blocked by items which are too tall or hang Remove coarse food residues from through the baskets. If in doubt, test crockery. for free movement by manually rotating the spray arms. There is no need to rinse items under running water. - Page 31 Silverware previously cleaned with a – Use detergents with glass protective silver polish may still be damp or additives (e.g. Miele CareCollection spotted at the end of a programme, tabs). where water has not run off smoothly. It may need to be rubbed dry with a soft –...
-
Page 32: Upper Basket
Loading the dishwasher Upper basket Cup rack Raise the rack upwards to make See "Loading the dishwasher / room for tall items. Loading examples" for examples of Glasses can be arranged along the cup how to load crockery and cutlery. rack for support during the programme. - Page 33 Loading the dishwasher Jumbo cup rack (depending on model) You can also move one of the side inserts of the cutlery tray to make The cup rack can be set at two different more room for tall glasses. widths so that it can also accommodate large cups.
-
Page 34: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket Depending on the setting of the upper basket, the following plate dimensions In order to gain more space for taller can be accommodated. pieces of crockery in the lower or upper basket, the upper basket can be Dishwashers with cutlery basket adjusted on three levels with 2 cm (see data plate for model number) -
Page 35: Lower Basket
Loading the dishwasher Lower basket Removable MultiComfort insert The rear section of the lower basket is See "Loading the dishwasher / used for washing cups, glasses, plates Loading examples" for examples of and pots. how to load crockery and cutlery. You can remove the MultiComfort insert ... - Page 36 Loading the dishwasher Glass rack Glass rail The glass rack can be raised to make This rail is designed to hold tall glasses more room for tall items. and glasses with stems securely. Stem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it.
- Page 37 Loading the dishwasher Hinged spikes Bottle holder The spikes at the front are used for The bottle holder can be used to wash washing plates, soup bowls, platters, narrow items, e.g. milk and baby desert bowls, and saucers. bottles. Both rows of spikes can be lowered to make more room for large items, e.g.
-
Page 38: Cutlery
Loading the dishwasher Cutlery 3D cutlery tray (depending on model) See "Loading the dishwasher / Loading examples" for examples of how to load crockery and cutlery. Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. -
Page 39: Loading Examples
Loading the dishwasher Loading examples Dishwashers with cutlery tray Upper basket Lower basket... - Page 40 Loading the dishwasher Cutlery tray Heavily soiled items...
-
Page 41: Operation
For optimum cleaning and drying remove coloured stains (e.g. tea, results, use Miele dishwasher coffee, tomato sauce). detergent and add Miele salt and Miele rinse aid separately. See Most dishwasher detergents are mildly "Optional accessories". alkaline and contain enzymes and oxygen based bleaching agents. - Page 42 Operation Detergent dosage Dishwasher detergents contain Follow the dosage recommended by irritant or corrosive ingredients which the manufacturer on the packaging. can cause burning in the nose, mouth and throat if swallowed, or Unless directed otherwise, use one inhibit breathing.
-
Page 43: Adding Detergent
Operation Adding detergent Add the required amount of detergent and close the flap. Press the opening catch on the detergent dispenser. The flap will Make sure that the detergent spring open. packaging is properly closed after use to avoid it getting damp and The flap is always open at the end of a clumping together. -
Page 44: Switching On
Operation Switching on Selecting a programme Make sure the spray arms can rotate Choose your programme according to freely. the type of load and how dirty it is. Close the door. The different programmes and their uses are described in the Programme ... -
Page 45: Starting The Programme
Operation Starting the programme Display Press the Start sensor. The estimated duration of the programme selected appears in hours The programme starts, and the prompt and minutes in the display before the shows in the Crockery can be added programme begins. -
Page 46: Energy Management
Operation Energy management If you have deactivated the automatic door opening function To save energy, the dishwasher will (see "Settings menu, AutoOpen"), switch off automatically 10 minutes but would still like to open the door after the last time a sensor has been at the end of the programme, then pressed or 10 minutes after the end of make sure that you open the door... -
Page 47: Switching Off
Operation Switching off Unloading the dishwasher At the end of a programme: Dishes tend to break and chip more easily when they are hot. Allow the The dishwasher can be switched off dishes to cool until they are at any time using the sensor. comfortable enough to handle before unloading them. -
Page 48: Interrupting A Programme
Operation Interrupting a programme Changing a programme A programme is interrupted as soon as If the detergent dispenser flap has the door is opened. already opened, do not change the If the door is closed again, the programme. programme will continue from the point it was at before the door was opened. -
Page 49: Programme Options
Programme options Extras Short Extra reduces the duration of Short You can select Extras for the the programmes in which this option is programme you have selected. available by up to 30%. Switch the dishwasher on using the In order to achieve optimum cleaning ... -
Page 50: Detergentagent
Programme options Soak DetergentAgent Extra is used for soaking Soak For optimum cleaning results, the crockery with dried on soiling. dishwasher automatically adjusts the programme sequence to the type of Energy and water consumption will detergent being used. Depending on increase with this Extra. -
Page 51: Delay Start With Ecostart
Programme options Delay start with EcoStart Switch the dishwasher on using the sensor. There are three ways of starting the Select the programme you want from programme by means of delaying the start. You can set the start time or the the main menu. - Page 52 Programme options Start at Finish at With the function, you set the With the function, you set the Start at Finish at exact time you want the programme to time you wish the programme to end at. start at. Use the sensors to set the hour ...
- Page 53 Programme options EcoStart Changing or deleting set times function allows you to take You can change the set times or the EcoStart advantage of time variable economy programme before the start time in the rates of electricity. Before you can use display is reached.
-
Page 54: Programme Overview
Programme overview Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C Sensor wash Variable programme sequence, sensor-controlled adjustment according to the amount of crockery and level of food deposits 47-65 required required Normal 55 °C Intensive 75 °C Sensor wash gentle ... - Page 55 Programme overview Consumption Duration Energy Water Cold water Hot water Litres Cold water Hot water 15 °C 55 °C 15 °C 55 °C h:min h:min 0.84 0.49 3:19 3:09 1:25-2:45 1:20-2:35 0.70 -1.30 0.50 -0.85 -16.0 1.10 0.70 14.0 1:59 1:47 1.45 0.95...
- Page 56 Programme overview Crockery Food deposits Action required Variable, sensor-controlled Mixed, programme sequence All normal food deposits everyday crockery Shorter duration This needs a short programme Heat-sensitive glasses and plastic Shorter duration Fresh, easily removed food deposits This needs a gentle programme with glass care Shorter duration Mixed crockery...
- Page 57 Programme overview Programme Detergent Compartment I Compartment II 25 ml Sensor wash 1 tab +short 20 ml Quick wash 40 °C 1 tab +short 20 ml Sensor wash gentle 1 tab +short 25 ml Extra quiet 1 tab 25 ml 1 tab +short 25 ml...
-
Page 58: Further Programmes
Miele's dishwasher cleaner or porcelain. This programme is conditioner (see "Optional accessories / particularly suitable for removing soiling Dishwasher care products). -
Page 59: Cleaning And Care
If, however, there are limescale or grease deposits in the cabinet, these can be removed with a proprietary dishwasher cleaner or conditioner (available from Miele). Follow the instructions on the packaging. Using mainly low temperature programmes (below 50 °C), could cause bacteria and unpleasant odours to build up in the wash cabinet. -
Page 60: Cleaning The Door Front
Cleaning and care Cleaning the door front To avoid damaging the external surfaces, do not use: Soiling that is left too long might – cleaning agents containing soda, become impossible to remove and ammonia, acids or chlorides, could cause the external surfaces to –... -
Page 61: Checking The Filters In The Wash Cabinet
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. - Page 62 Cleaning and care To clean the inside of the filter, the flap Replace the filter combination so that must be opened: it lies flat in the base of the wash cabinet. Press catches together in the direction of the arrows as shown, and ...
-
Page 63: Cleaning The Spray Arms
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Switch the dishwasher off. Remove the spray arms as follows: ... -
Page 64: Problem Solving Guide
The mains fuse has tripped. during a programme. Reset the trip switch in the mains fuse box or replace the fuse in the plug (minimum fuse rating - see data plate). If the mains fuse trips again, call the Miele Service Department. - Page 65 Select the programme you want. Press the Start sensor. If the fault message appears again, there is a technical fault. Call the Miele Service Department. The Waterproof system has reacted. Waterproof fault Close the stopcock.
-
Page 66: Water Inlet Fault
Problem solving guide Water inlet fault Problem Cause and remedy The buzzer sounds. One of the following fault messages appears in the display: The stopcock is closed. Water inlet fault Open the stopcock fully. Please open the stopcock Before rectifying the problem: ... -
Page 67: Water Drainage Fault
Problem solving guide Water drainage fault Problem Cause and remedy The buzzer sounds. Before rectifying the problem: The following fault Switch the dishwasher off with the sensor. message appears in the The water outlet is restricted. display: There might be water in the wash cabinet. ... -
Page 68: General Problems
Problem solving guide General problems Problem Cause and remedy The display is dark. The display has switched off automatically to save energy. Switch the dishwasher back on using the sensor. The interior lighting The lighting has been switched off permanently. does not come on when ... - Page 69 Problem solving guide Problem Cause and remedy Water remains in the Before rectifying the problem: wash cabinet at the end Switch the dishwasher off using the sensor. of a programme. The filter combination in the wash cabinet is clogged. ...
-
Page 70: Noises
Problem solving guide Noises Problem Cause and remedy Knocking noise in the A spray arm is knocking against an item in a basket. wash cabinet. Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the Items of crockery are insecure in the wash cabinet. -
Page 71: Unsatisfactory Washing Result
Problem solving guide Unsatisfactory washing result Problem Cause and remedy The dishes are not The dishes were not loaded correctly. clean. See notes in "Loading the dishwasher". The programme was not powerful enough. Select a more powerful programme (see "Programme chart"). - Page 72 Problem solving guide Problem Cause and remedy Crockery is not dry or The rinse aid dosage is set too low or the rinse aid cutlery and glasses are reservoir is empty. flecked. Replenish the reservoir, increase the dosage or change the brand of rinse aid (see "Before using for the first time, Rinse aid").
- Page 73 Problem solving guide Problem Cause and remedy White residue is visible The rinse aid dosage is set too low. on crockery and Increase the dosage (see "Settings menu, Rinse cutlery, clouding occurs aid"). on glassware; film can There is no salt in the salt reservoir. be wiped off.
-
Page 74: Maintenance
Replace the filter and seal, making union. sure they are sitting correctly. This filter is available from Miele. Reconnect the inlet hose to the stopcock, making sure it goes on Cleaning the filter: correctly and is not cross-threaded. -
Page 75: Cleaning The Drain Pump And Non-Return Valve
Maintenance Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Disconnect the dishwasher from the mains supply. -
Page 76: After Sales Service
The latest version of this leaflet can be – the Miele Service Department ordered by email from: – testinfo{miele.de Contact details for Miele are given at the back of this manual. N.B. A call- Please quote your postal address, as out charge will be applied to service... -
Page 77: Optional Accessories
Dishwasher detergent, rinse – with enzymes which are effective aid and salt even in low temperature programmes When you decided to buy a Miele – with glass protection against dishwasher you chose excellent quality corrosion and performance. However, ensuring... - Page 78 Optional accessories Dishwasher care products Accessories Miele cleaning and care products Some accessories may be supplied as provide optimum care for your standard, depending on model. dishwasher. Cappuccinatore insert Dishwasher cleaner The Cappuccinatore insert can be used – cleans the dishwasher effectively and...
-
Page 79: Electrical Connection
Electrical connection Electrical connection U.K. This appliance must not be used with so-called energy saving devices. These reduce the energy supply to the All electrical work must be appliance which could then become carried out by a suitably qualified too warm. -
Page 80: Plumbing
As long as your dishwasher has been Water in the dishwasher must installed correctly, the Miele waterproof not be used as drinking water. anti-leak system will protect you from water damage throughout its lifetime. – The dishwasher may be connected to a cold or hot water supply, max. - Page 81 Plumbing – The inlet hose is approx. 1.5 m long. After connecting the dishwasher to A 1.5 m long flexible metal extension the water supply, check that all hose, pressure tested to 14000 plumbing connections are watertight. kPa/140 bar) is available as an optional accessory, if required.
-
Page 82: Drainage
Plumbing Drainage Venting the drainage system If the on-site drain connection is – The appliance drainage system is situated lower than the guide path for fitted with a non-return valve, which the bottom basket rollers in the open prevents dirty water from flowing door, the drainage system must be back into the dishwasher via the vented. -
Page 83: Technical Data
Technical data Dishwasher model Standard Height freestanding model 84.5 cm (adjustable + 3.5 cm) Height built-in model 80.5 cm 84.5 cm (adjustable + 6.5 cm) (adjustable + 6.5 cm) Height of building-in recess Min. 80.5 cm (+ 6.5 Min. 84.5 cm (+ 6.5 Width 59.8 cm 59.8 cm... -
Page 84: Settings Menu
Settings menu Settings menu for changing Sub-menu options which have already standard settings been selected will have a tick beside them. Open the Settings menu To exit a sub-menu again use the Switch the dishwasher on with the sensor. -
Page 85: Time
Settings menu Time Setting the time of day You can set the current time of day. The dishwasher is delivered with the The current time of day must be set time of day (clock) display deactivated. before you can use the " Delay start To save energy the dishwasher will programme option. -
Page 86: Water Hardness
Settings menu Water hardness °d mmol/l °f Display Your dishwasher is fitted with a water softener which you need to programme to the water hardness level in your area. – The dishwasher must be programmed to the correct water hardness for your area. –... -
Page 87: Rinse Aid
Settings menu Rinse aid Consumption (EcoFeedback) You can adjust the rinse aid dosage for You can programme the dishwasher so best results. that the energy and water consumption The rinse aid dosage can be set from of the currently selected programme approx. -
Page 88: Sensor Wash
Settings menu Sensor wash BrilliantLight You can adjust the This dishwasher has interior lighting. Sensor wash programme so that it will remove When the door is open the lighting will stubborn soiling in a lightly soiled load. switch off automatically after 15 minutes. -
Page 89: Check Filters
Settings menu Check filters Save extras You can adjust the interval at which the Additional programme options can be reminder to check the filters appears. added to some programmes, e.g. Short You can set an interval of between 30 (see "Programme options, Extras"). and 60 programme cycles. -
Page 90: System Lock
Settings menu System lock Temperature The system lock prevents your The temperature can be displayed in dishwasher being used without your °C/Celsius or °F/Fahrenheit. knowledge. The factory default setting is °C. If an attempt is made to switch the Select the option you want and dishwasher on when the system lock is confirm with activated... -
Page 91: Volume
Settings menu Volume Night time You can select the times for night time A sequence of audible tones will sound to begin and end. at the end of the programme or if there is a fault as long as the buzzer has ... -
Page 92: Memory
Settings menu Memory Version info With the Memory function activated, You can call up the electronic software the dishwasher will save the last version of your dishwasher for technical programme selected. When you switch support purposes. the dishwasher off and back on again, ... -
Page 93: Ecostart
Settings menu EcoStart Setting the electricity tariff times Before you can use the option, EcoStart In order to run your dishwasher in the you must set at least one electricity most economical way, you can use the tariff time. option to take advantage of EcoStart your electricity supplier's time variable ... - Page 94 Settings menu Changing the electricity tariff times Deleting the electricity tariff times You can change the start, finish or You can delete the settings for an priority of a electricity tariff time. electricity tariff time and in doing so deactivate the option for this EcoStart...
-
Page 95: Showroom Programme
Settings menu Showroom programme Factory default You can reset all settings to the factory For demonstration purposes only. default settings. The dishwasher is equipped with You will be given the choice of Appliance various demo programmes for settings reset Main menu showroom use. - Page 100 G 6900 / G 6905 en-GB M.-Nr. 09 645 520 / 03...