Miele HG05 Operating Instructions Manual
Hide thumbs
Also See for HG05:
- Operating instructions manual (116 pages) ,
- Operating instructions manual (96 pages) ,
- Operating instructions manual (100 pages)
Related Manuals for Miele HG05
Summary of Contents for Miele HG05
-
Page 1: Operating Instructions
Operating Instructions Dishwasher To prevent accidents and machine damage, read these instructions be- fore installation or use. en-US HG05 M.-Nr. 10 546 840... -
Page 3: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS .............. 6 Guide to the dishwasher.................. 15 Appliance overview ....................15 Control panel ......................16 Display functions ....................17 Caring for the environment ................ 18 Energy-saving dishwashing................... 19 Before using for the first time ................ 20 Opening the door .................... - Page 4 Contents Interrupting a program................... 53 Changing a program....................53 Options ......................... 54 Options........................54 FlexiTimer with EcoStart ..................55 Program overview .................... 58 Settings menu...................... 62 Opening the Settings menu................... 62 Language ......................62 Time of day......................62 Water hardness ..................... 63 Rinse aid........................
- Page 5 Contents Poor cleaning results ..................... 82 Frequently asked questions ................ 85 Cleaning the drain pump and non-return valve............. 85 Customer service .................... 86 Repairs ........................86 Warranty ........................ 86 Optional accessories .................. 87 Installation Instructions ..................89 Electrical connection .................. 90 Water connection ....................
-
Page 6: Important Safety Instructions
Keep the installation plan and the operating instructions in a safe place and pass them on to any future owner. Miele cannot be held liable for damage caused by non-compliance with this information. -
Page 7: Correct Use
IMPORTANT SAFETY INSTRUCTIONS Correct use This dishwasher is intended for use in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. It must only be used as specified in these operating instructions for cleaning domestic dishes and cutlery. - Page 8 IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the appliance unless they are constantly supervised. Children should be supervised to ensure that they do not play with the appliance. Keep small children away from the appliance at all times to avoid the risk of injury.
- Page 9 Miele cannot be held liable for the consequences of an inadequate grounding system (e.g. electric shock). ...
- Page 10 IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage, and fre- quency) matches the electrical supply before connecting the dish- washer to the mains. Consult a qualified electrician if in any doubt. ...
- Page 11 If the connection cable is damaged, it must be replaced with a special cable of the same type (available from Miele) by a Miele-au- thorized service technician only. This dishwasher is supplied with a special bulb to cope with par- ticular conditions (e. g.
- Page 12 IMPORTANT SAFETY INSTRUCTIONS Proper installation The dishwasher must be installed and connected in compliance with the installation plan. Be careful when installing the dishwasher. Wear protec- tive gloves to avoid injury on any sharp metal components. The dishwasher must be correctly aligned horizontally to ensure problem-free operation.
- Page 13 IMPORTANT SAFETY INSTRUCTIONS Proper use Do not use solvents in the dishwasher. Danger of explosion! Do not inhale or ingest powder detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or in- haled.
- Page 14 Please observe the information given in "Technical data" regarding the capacity of the dishwasher. Accessories Use only genuine original Miele parts. If spare parts or acces- sories from other manufacturers are used, the warranty may become invalid. Disposal of your old dishwasher ...
-
Page 15: Guide To The Dishwasher
Guide to the dishwasher Appliance overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Double-chamber detergent dispenser e Heat exchanger return (depending on k In-operation indicator light model) l Reservoir for reactivation salt... -
Page 16: Control Panel
Guide to the dishwasher Control panel a In-operation indicator light f OK button b Program selection g Display c Short and Extra Economical option h Program selection button buttons with indicator lights i (On/Off) button d Arrow buttons e button (FlexiTimer) with indicator light These operating instructions apply to several different dishwasher models with different heights. -
Page 17: Display Functions
Guide to the dishwasher Settings menu Display functions General information The display is used to select or set the following: The Settings menu is used to adapt the – The program electronic module of the dishwasher to changing requirements. See the "Set- –... -
Page 18: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 19: Energy-Saving Dishwashing
Caring for the environment Energy-saving dishwashing This dishwasher is economical in the consumption of water and energy. For best results follow these tips: – For most economical dishwashing, make full use of the baskets without overloading the dishwasher. – Choose a program that best suits the degree of soiling and the type of dishes being washed. -
Page 20: Before Using For The First Time
Before using for the first time Opening the door Closing the door Push the baskets in. At the end of programs with a drying phase (see "Program overview"), the Then lift the door upwards and push door will open automatically a little in until it clicks into position. -
Page 21: Basic Settings
Before using for the first time Time of day Basic settings The display will then change to the Open the door. screen for setting the time. Turn the dishwasher on with the The current time of day must be set be- button. - Page 22 Before using for the first time Water hardness The message Set-up successfully com- pleted will then appear in the display. The display changes to the screen for setting the water hardness. After confirming this with OK, the prompts and Refill salt Refill rinse aid –...
-
Page 23: Before Using The Appliance For The First Time, You Require
Before using for the first time Before using the appliance for If the water in your area is very soft the first time, you require: and consistently lower than 5 gr/gal (5 °d - German scale) you do not – Approx. 2 qt (2 l) of water have to add dishwasher salt. -
Page 24: Filling The Salt Reservoir
Before using for the first time Filling the salt reservoir Important! Before filling the salt reservoir with dishwasher salt for the first time, you must fill it with approx. 2 qt (2 l) of water to enable the salt to dissolve. Once the dishwasher has been used for the first time, there is always suf- ficient water in the reservoir. -
Page 25: Salt Refill Indicator
Before using for the first time Salt refill indicator If you only ever use Tab products in your dishwasher, you can switch off Fill the salt reservoir with dishwasher both refill indicators for salt and rinse salt for reactivation when Refill salt aid if you wish (see "Settings menu, appears in the display. -
Page 26: Rinse Aid
Before using for the first time Adding rinse aid Rinse aid Rinse aid is needed to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. Filling the rinse aid reservoir with detergent will damage the reservoir. -
Page 27: Rinse Aid Indicator
Before using for the first time Rinse aid indicator When the Refill rinse aid message ap- pears in the display, the reservoir con- tains sufficient rinse aid for 2 - 3 pro- grams only. Add rinse aid. Confirm with OK. The rinse aid refill indicator will go out. -
Page 28: Loading The Dishwasher
Loading the dishwasher – Make sure that small items cannot Tips fall through the holders in the bas- Remove coarse food residues from the kets. dishes. Small items, e.g., lids, should there- fore be placed in the cutlery tray or There is no need to rinse items under cutlery basket (depending on model). - Page 29 Loading the dishwasher Items not recommended for dish- Glass care washing – Clouding may occur on glasses after – Wooden cutlery, cutting boards and frequent washing. If delicate glass- dishes or items with wooden parts ware is washed in the dishwasher, ensure that only very low tempera- –...
-
Page 30: Loading Examples
Loading the dishwasher Loading examples Loading for 10 standard place settings with cutlery tray Lower basket Upper basket Cutlery tray (depending on model) - Page 31 Loading the dishwasher Loading for 16 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray (depending on model)
- Page 32 Loading the dishwasher Loading for 10 standard place settings with cutlery basket Lower basket Upper basket Cutlery basket...
- Page 33 Loading the dishwasher Loading for 13 standard place settings with cutlery basket Lower basket Upper basket Cutlery basket...
-
Page 34: Flexassist
Loading the dishwasher Cup rack FlexAssist Using the yellow lever , lift the cup The yellow FlexAssist components indi- rack upwards to make room for tall cate which elements of the baskets for items. dishes and cutlery tray are moveable. They also act as grips and have sym- Glasses can be arranged along the po- bols embossed on them to show what... - Page 35 Loading the dishwasher Hinged spikes XXL cup rack (depending on model) The rows of spikes can be lowered to The cup rack can be set at two different make more room for larger items such widths so that it can also accommodate as casserole dishes.
- Page 36 Loading the dishwasher Glassware rail Adjusting the height The glassware rail is designed to hold You can set the glassware rail at two glasses with long stems securely. different heights. Lower the glassware rail with the yel- Pull the rail upwards and click it back low lever ...
-
Page 37: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket Dishwashers with cutlery basket (see data plate for model number) In order to gain more space for taller items the upper basket can be adjusted Plate in inches (cm) Upper on three levels with 3/4" (2 cm) between basket Upper basket Lower... -
Page 38: Lower Basket
Loading the dishwasher Removable MultiComfort insert Lower basket The rear section of the lower basket is used for washing cups, glasses, plates, pots and pans. You can remove the MultiComfort insert to make more room for larger items such as casserole dishes. Removing the insert ... - Page 39 Loading the dishwasher FlexCare glass holder Glassware rail Silicone padding in the FlexCare glass The glassware rail is designed to hold holder provides a stable and secure glasses with long stems securely. hold for delicate stemware. Stem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it.
- Page 40 Loading the dishwasher Hinged spikes Bottle holder The spikes at the front are used for The bottle holder can be used to wash washing plates, soup bowls, platters, narrow items, e.g., milk and baby bot- dessert bowls, and saucers. tles. The spikes can be lowered to make more room for large items, e.g.
-
Page 41: Pot Rests And Filters
Loading the dishwasher Pot rests Pot rests and filters You can also wash Miele pot rests and Rust damages the dishwasher. Miele hood filters. Wash only pot rests that are undam- aged and not rusty. Select the program for Grates &... - Page 42 Loading the dishwasher Filters You can wash two range hood filters in the upper basket and two in the lower basket at once. If you only want to wash two filters, put them in the top basket. Lower basket Be careful when unloading the filters.
-
Page 43: Cutlery
Loading the dishwasher Cutlery The upper spray arm must not be blocked by items which are too big. 3D cutlery tray+ (depending on model) The side sections of the tray can be Arrange the cutlery in the tray as moved into the middle using the yellow shown. - Page 44 Loading the dishwasher Both rows of spikes in the middle sec- tion of the cutlery tray can be flipped over to make room for larger pieces of cutlery. You can use the yellow slide to adjust the height of the middle section of the cutlery tray to make more room for large items of cutlery, such as serving spoons and ladles.
-
Page 45: Cutlery Basket (Depending On Model)
Loading the dishwasher Cutlery basket (depending on model) Fit it onto the cutlery basket if re- quired. The cutlery basket can be placed any- where on the front rows of spikes in the lower basket. To avoid the risk of injury, knives and forks should be placed with the han- dles upwards in the basket. -
Page 46: Operation
(e.g., tea, cof- For optimum cleaning and drying re- fee, tomato sauce). sults, use Miele dishwasher detergent and add Miele salt and Miele rinse aid Most dishwasher detergents are mildly separately. alkaline and contain enzymes and oxy- gen-based bleaching agents. - Page 47 Operation Detergent dosage Dishwasher detergents can Follow the dosage recommended by cause burning in the nose, mouth, the manufacturer on the packaging. and throat if swallowed, or inhibit breathing. Unless directed otherwise, use one Avoid inhaling or swallowing dish- detergent tab or add 1 1/4 - 2 table- washer detergent.
- Page 48 Operation Adding detergent Add the required amount of detergent and close the flap. Press the opening catch on the deter- gent dispenser. The flap will spring Make sure that the detergent packag- open. ing is properly closed after use to avoid it getting damp and becoming The flap is always open at the end of a lumpy.
-
Page 49: Turning On
Operation Turning on Selecting a program Turn on the water supply if it is turned Choose your program according to the off. type of load and the degree of soiling. Open the door. The different programs and their uses are described in the Program Over- ... -
Page 50: Starting A Program
Operation Starting a program Time display Start the program by closing the door The estimated duration of the program within four seconds of the last press selected appears in hours and minutes of a button. in the display before the program be- gins. -
Page 51: Energy Management
Operation Energy management At the end of the program To save energy, the dishwasher will At the end of a program, the In-opera- switch off automatically 10 minutes af- tion indicator light will be visible flashing ter the last time a button has been slowly with the door shut. -
Page 52: Turning Off The Dishwasher
Operation Turning off the dishwasher Unloading the dishwasher At the end of a program: Dishes tend to break and chip more easily when they are hot. Allow the Open the door. dishes to cool until they are comfortable The dishwasher can be switched off enough to handle before unloading at any time using the ... -
Page 53: Interrupting A Program
Operation Interrupting a program Changing a program The program will be interrupted as soon If the detergent dispenser flap has al- as you open the door. ready opened, do not change the After four seconds, the indicator light of program. the selected program will flash and the message will appear in... -
Page 54: Options
Options Short Options The Short option reduces the duration You can select and deselect the options of programs in which this option is before starting the program using the available by up to 30% (see "Program appropriate buttons and the display overview"). -
Page 55: Flexitimer With Ecostart
Options If, while you are setting the time, you do FlexiTimer with EcoStart not press any buttons for several sec- The FlexiTimer gives you three ways onds, the display will revert to the previ- of starting the program by means of de- ous menu. - Page 56 Options Start at Finish at With the Start at function, you set the With the Finish at function, you set the exact time at which you want the pro- time at which you wish the program to gram to start. end.
- Page 57 Options EcoStart Changing or deleting set times EcoStart function allows you to take You can change the set times or the advantage of time variable economy program before the start time in the dis- rates of electricity. Before you can use play is reached.
-
Page 58: Program Overview
Program overview Program When to use Program sequence Pre- Main Interim Final Drying wash wash rinse rinse °F/°C °F/°C Program for regular use to completely 117- 140/ Normal wash a full load of normally soiled needed 140/ dishes with the ability to adjust en- ergy and water consumption based on the soil load of the dishes. - Page 59 Program overview Consumption Duration Energy Water Cold water Hot water Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C 50°F/10°C 120°F/49°C h:min h:min 1.02 1.11 3.2/12.1 2:19 2:00 1.30 1.55 3.8/14.5 3:24 3:07 0.85 1.05 3.4/13.0 2:23 2:03 1.15 1.25 3.0/11.5 1:15 0:58 1.45 1.65...
- Page 60 Grates & Wash program for cleaning Miele 167/ 136/ Filters grates, the Miele griddle plate, and Miele ventilation hood filters. Clean Special cleaning program to remove 167/ 158/ Machine grease deposits from the dish-...
- Page 61 Program overview Consumption Duratiion Energy Water Cold water Hot water Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C 50°F/10°C 120°F/49°C h:min h:min 0.01 0.20 1.1/4.0 0:14 0:14 0.80 1.00 2.5/9.5 4:35 4:28 1.45 1.70 3.8/14.5 3:48 3:25 1.95 2.25 5.7/21.5 2:43 2:11 Values quoted are in accordance with 10 CFR 430 / C373-04.
-
Page 62: Settings Menu
Settings menu Language Adjusting default values The display can be set to appear in one Opening the Settings menu of several different languages. Switch the dishwasher on with the You can change the language in the button if it is switched off. display via the Language ... -
Page 63: Water Hardness
Settings menu Water hardness °d gr/gal °f Display This appliance is fitted with a softener assembly. The dishwasher must be programmed for the water hardness in your area. – The dishwasher must be pro- grammed to the correct water hard- ness for your area. -
Page 64: Rinse Aid
Settings menu Rinse aid EcoStart You can adjust the rinse aid dosage for In order to run your dishwasher in the best results. most economical way, you can use the The rinse aid dosage is set in stages EcoStart option to take advantage of from 0 to 6. - Page 65 Settings menu Setting the electricity rate times Changing the electricity rate times Before you can use the EcoStart option, You can change the start, finish or pri- you must set at least one electricity rate ority of an electricity rate time. time.
-
Page 66: Soak
Settings menu Deleting the electricity rate times Soak You can delete the settings for an You can use this function to loosen electricity rate time and in doing so dried-on food residues in the program deactivate the EcoStart option for this selected. -
Page 67: Pre-Rinse
Settings menu Pre-Rinse Volume You can use this function to remove A sequence of buzzer tones will sound easily loosened food residues in the at the end of the program or if there is a program selected. fault as long as the buzzer has been ac- Once activated, this function will be tivated. -
Page 68: Refill Indicators
Settings menu Refill indicators Check filters If you consistently use a Tab detergent You can adjust the interval at which the and the refill indicators for salt and rinse message to remind you to check the fil- aid are bothering you, you can deacti- ters appears. -
Page 69: Autoopen
Settings menu AutoOpen Optimize Standby At the end of programs with a drying The dishwasher is supplied with the phase, the door will open automatically timize standby function switched on as a little in order to help the drying standard. process (see "Program overview"). -
Page 70: Software Version
WLAN module settings (where applica- Confirm the display with OK. ble) have to be reset separately (see "Settings -Miele@home - Module set- Showroom program tings"). Select Reset and confirm with OK. -
Page 71: Cleaning And Care
The control panel should only be these can be removed with a special wiped with a damp cloth. cleaning agent (available from Miele). Cleaning the indicator reflector Follow the instructions on the packag- panel ing. -
Page 72: Cleaning The Door Front
Cleaning and care To better maintain your appliance Cleaning the door front avoid the following: If soiling remains longer, it may – Cleaning products containing soda, happen that the surfaces can be- ammonia, acid, or chloride come discolored or changed. –... -
Page 73: Filter System
Cleaning and care Filter system Filter system Turn the dishwasher off. The filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects. ... - Page 74 Cleaning and care Replace the filter system so that it lies To clean the inside of the filter, the flap flat in the base of the wash cabinet. must be opened: Press catches together in the di- ...
-
Page 75: Cleaning The Spray Arms
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Turn the dishwasher off. Remove the spray arms as follows: ... -
Page 76: Frequently Asked Questions
The circuit breaker has tripped. during a program. Reset the fuse (see data plate for the correct fuse rating). If the circuit breaker trips again, contact Miele Ser- vice. After the program has The indicator reflector panel was not correctly fitted. -
Page 77: Frequently Asked Questions
Turn the dishwasher back on. Select the desired program. Close the door. If the error message is displayed again, there is a technical fault. Contact Miele Service. The WaterProof System has reacted. Waterproof Turn off the water supply. -
Page 78: Water Intake Fault
Frequently Asked Questions Water intake fault Problem Possible cause and solution The In-operation indica- tor light is flashing quickly. The buzzer is sounding. One of the following faults appears in the display: The water supply is turned off. Open water supply ... -
Page 79: Water Drainage Fault
Frequently Asked Questions Water drainage fault Problem Possible cause and solution The Optical Interface is Before fixing the fault: flashing quickly. Turn the dishwasher off with the button. The buzzer is sounding. There is a problem with the water intake. The following fault ap- There might be water in the wash cabinet. -
Page 80: General Problems
Frequently Asked Questions General problems Problem Possible cause and solution The Optical Interface is The safe mode of the dishwasher was activated. flashing quickly. The following takes place: The warning buzzer is – If you do not close the door within four seconds of sounding. -
Page 81: Noises
Frequently Asked Questions Noises Problem Possible cause and solution There is a knocking A spray arm is hitting the dishes. noise in the wash cabi- Interrupt the program, and rearrange the items net. which are obstructing the spray arm. There is a rattling noise Dishes is moving around in the wash cabinet. -
Page 82: Poor Cleaning Results
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishes are not The dishes were not loaded correctly. clean. See notes in "Loading the dishwasher". The program was not powerful enough. Select a more intensive program (see "Program overview"). - Page 83 Frequently Asked Questions Problem Possible cause and solution Dishes is not dry or cut- The rinse aid dosage is set too low or the rinse aid lery and glasses are reservoir is empty. spotty. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see "Before using for the first time - Rinse aid").
- Page 84 Frequently Asked Questions Problem Possible cause and solution White residue is visible The rinse aid dosage is too low. on dishes and cutlery, Increase the dosage (see "Settings menu, Rinse clouding occurs on aid"). glassware; this film can The salt reservoir is empty. be wiped off.
-
Page 85: Cleaning The Drain Pump And Non-Return Valve
Frequently asked questions Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a program, the drain pump or the non-return valve might be blocked. They are, however, easy to clean. ... -
Page 86: Customer Service
Miele appliance. Please note that unless expressly ap- proved in writing by Miele’s Service de- partment, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. -
Page 87: Optional Accessories
These and many other useful products glass protection additives can be ordered from a Miele dealer or – Phosphate-free - kind to the environ- via the Miele Webshop (see end of this ment booklet for contact details). - Page 88 Optional accessories Dishwasher care products Miele cleaning and care products pro- vide optimum care for your dishwasher. Dishwasher cleaner – Cleans the dishwasher effectively and thoroughly – Removes grease, bacteria, and un- pleasant odors – Ensures excellent dishwashing re- sults Dishwasher descaler –...
-
Page 89: Installation Instructions
Installation Instructions Please refer to the Installation Diagram supplied with these instructions. To comply with IEC sound testing protocols, please contact Miele for additional instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. -
Page 90: Electrical Connection
Technical Service Department: USA: 1-800-999-1360 A damaged power cord must only be CDN: 1-800-565-6435 replaced with a genuine Miele cord by a Miele service technician. Specifications The dishwasher comes equipped with a Grounding instructions 4 ft (1.2 m) powercord (measured from... -
Page 91: Grounding Instructions
Electrical connection Hardwired electrical connection Prior to making a hardwire connec- It is possible to hardwire this appliance tion to the terminal, remove the pow- to an existing power cable. ercord. Otherwise there will be a risk of electric shock from the attached CAUTION: Before servicing, discon- plug. -
Page 92: Water Connection
Water connection – Water pressure: Must be between Water intake 4.5 - 145 psi (0.3 - 10 bar) If the water Water in the dishwasher must pressure is lower than this, the fault not be used as drinking water. message Intake will appear in the dis- play (see "Frequently asked ques- –... -
Page 93: Drainage
Water connection Drainage Make sure that there are no kinks in the hose, and that it is not – The machine comes equipped with a squashed or stretched. built-in non-return valve on the dis- charge side to prevent waste water from flowing back into the dish- After servicing the appliance, ensure washer. -
Page 94: Sound Emission Testing
Sound emission testing Prerequisites for sound emission tests Load the dishwasher with 16 standard place settings and use the Normal pro- gram. Setup for sound emission tests The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. ... - Page 95 Sound emission testing Push the provided fleece strips (depending on model) under the toe-kick until it is flush with the appliance feet . Push the toe-kick into place in such a way that it is flush with the door front .
- Page 96 Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Push the insulating strip into the front top edge of the toe-kick .
- Page 99 Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
- Page 100 G 6780 / G 6785 en-US M.-Nr. 10 546 840 / 02...