Control - Agilent Technologies 1260 Infinity II User Manual

4
Installation of the Optional Sample Cooler
Using the Sample Cooler in an Infinity II Sampler

Control

The Cooler section of the Control dialog box is available when you have a
cooler installed. It allows you to switch the cooler on and off manually.
Select On to switch on the cooler. Specify the required temperature in the
adjacent field. Note that the specified temperature must be at least 5 °C below
ambient for proper temperature control.
Select Off to switch off the cooler.
Agilent 1260 Infinity II Preparative Autosampler User Manual 67