Zte ZXHN F680 User Manual page 6

Indicator
LAN1–LAN4
2.4GHz
5GHz
WPS
BBU
USB1、USB2
4
Interface
Figure 4-1 shows the interfaces and buttons on the side panel of the ZXHN
F680.
Status
Off
Solid green
Flashing green
Off
Solid green
Flashing green
Off
Solid green
Flashing green
Yellow
Green
Red
Off
Solid green
Flashing green
Off
Solid green
Flashing green
Description
The device is not powered on or the network
link is not established.
The network link has been established but no
data is being transmitted or received.
Data is being transmitted or received.
The device is not powered on or the wireless
interface is disabled.
The wireless interface is enabled.
Data is being transmitted.
The device is not powered on or the wireless
interface is disabled.
The wireless interface is enabled.
Data is being transmitted.
Negotiation is in progress.
Negotiation is successful.
Session overlapping detection is being
implemented or negotiation fails.
There is no standby power supply or the
standby power supply fails.
The standby power supply is used and operates
properly.
The standby power supply is used but operates
improperly. For example, undervoltage occurs.
The device is not powered on or the USB
interface is not connected.
The USB interface is connected and operating
in host mode, but no data is being transmitted.
Data is being transmitted on the interface.