Overview LR 325/01 Overview Structure and function Structure Shaft Connection head Recommended fields of application Measurements in ultapure water. Cleaning CAUTION Before cleaning, disconnect the sensor from the instrument. Cleaning A thorough cleaning is particularly recommended for measurements of low conductivities.
LR 325/01 What to do if... What to do if... Error symptom Cause Remedy No temperature or – No connection between – Check connection between conductivity display measuring instrument and sensor measuring instrument and sensor – Cable defective Measurement delivers –...
Sensor with closed plug IP 68 (2 x 10 Pa or 2 bar) resistance connection Cable plug IP 67 (when plugged in) The LR 325/01 meets the requirements according to article 3(3) of the 97/23/EC directive ("Pressure equipment directive"). ba55303e05 01/2009...
Page 7
LR 325/01 Technical data Measurement Conductivity measuring 0.001 µS/cm ... 200 µS/cm conditions range Temperature range -5 ... 80 °C (100 °C) 23 ... 176 °F (212 °F) Max. allowed overpressure 2 x 10 Pa (2 bar) Minumum depth of immer-...
Page 8
Technical data LR 325/01 ba55303e05 01/2009...