2.5 Connection To Dvb-Asi Equipment; Connection To Dvb-Asi Input Equipment - Fujitsu IP-HE950 Hardware User's Manual

IP-HE950 Hardware User's Guide

2.5 Connection to DVB-ASI Equipment

2.5
This section describes connection to DVB-ASI equipment.
2.5.1

Connection to DVB-ASI input equipment

Connect DVB-ASI equipment to the ASI output connector of the IP-HE950E (encoder).
Connect a BNC cable to ASI-OUT1 or ASI-OUT2 of the IP-HE950E.
The following figure shows how to connect them.
See
Figure 2-9 DVB-ASI input equipment connections
For details on connectors and cables, refer to "4.2 Cable and Connector
Details." For electrical specifications, refer to "A.2.3 Interface
specifications."
Chapter 2 Installation and Connection
Copyright 2017 FUJITSU LIMITED
29