Connection To A Power Source - Fujitsu IP-HE950 Hardware User's Manual

IP-HE950 Hardware User's Guide Chapter 2 Installation and Connection
2.2.2

Connection to a power source

Plug the AC power cord into the power inlet connector.
* Refer to "4.2 Cable and Connector Details," and select power cord. You can procure a power
cord separately by specifying the length.
Figure 2-4 Power cord connection
- Mounting the AC cord clamp
Insert the AC cord clamp into the mounting hole, and secure the power cord to the AC
cord clamp, which prevents the power cord from falling out.
Copyright 2017 FUJITSU LIMITED
23