Fujitsu IP-HE950 Hardware User's Manual page 10

IP-HE950 Hardware User's Guide
CAUTION
Work time
Installation and
relocation
Prohibited
Instruction
Cleaning
Prohibited Instruction
Maintenance
Prohibited
Instruction
This indicates a situation that could lead to minor or moderate injury
and/or damage to this unit itself or other property if procedures are not
followed correctly.
Possibility of serious injury and damage to this unit
Do not install this unit in a place where it is exposed to shock and strong
vibrations, on an incline, or at an unstable location. Otherwise, there may be
a hazardous situation that could lead to serious injury and damage to this
unit.
Possibility of serious injury and damage to this unit
When relocating this unit, observe the precautions given below to protect
against injury and damage to the unit.
- Set the power switch to the OFF position, and disconnect all connected
cables. Take care to avoid getting your feet entangled in the cables.
- To prevent serious personal injury when moving the unit, pay special care
and attention to your surroundings.
Possibility of fire, serious injury, and damage to this unit
When cleaning this unit, observe the precautions given below to protect
against fire, serious injury, and damage to the unit.
- When cleaning the unit, do not use cleaning spray that contains
combustible material. Furthermore, do not use such spray around the unit.
- When cleaning the unit, wipe it with a cloth with the water (or neutral
detergent diluted in water) squeezed out.
- When wiping, be careful to prevent water from entering the IP-HE950 from
a button/switch or opening.
Possibility of serious injury and damage to this unit
When performing maintenance on this unit, observe the precautions given
below to protect against serious injury and damage to the unit.
- Be sure to turn off the power and then unplug the power cord from the
power receptacle before installing or removing an SFP module, which is a
hardware option. Furthermore, when connecting this unit with a
conversion cable, pay special care and attention to not damage the
conversion cable.
- The SFP module has a lock mechanism. Firmly insert the module until it
locks. When removing the module, hold down the unlock mechanism.
Never forcibly remove the module because that may cause damage.
Precaution
Copyright 2017 FUJITSU LIMITED
ix