Fans - HP OMEN Maintenance And Service Manual

Fans

NOTE: The left and right fans are spared separately.
Description
Left fan
Right fan
IMPORTANT:
and replacement
Before removing the fans, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Solid state drive (see
b. Hinge covers (see
c. System support brackets (see
Remove the fans:
1. Disconnect the fan cables from the system board (1).
2. Remove the fan cables from the routing path clips (2).
3. Remove the two Phillips PM2.0×5.7 screws (3) securing the fans to the computer.
52 Chapter 6 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page
Solid state drive on page
Hinge covers on page
33), and then remove the following components:
37).
48).
System support brackets on page
Spare part number
929455-001
929456-001
49).