Back Cover - HP OMEN Maintenance And Service Manual

Back cover

Description
Back cover (for use only on computer models equipped with an infrared webcam)
Back cover (for use only on computer models equipped with a standard webcam)
IMPORTANT:
and replacement
To remove the back cover, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
c. Heat sink (see
d. System board (see
e. Display assembly (see
f. Display bezel (see
g. Webcam (see
h. Display panel (see
i. Display cable and webcam cable (see
j. WLAN antennas (see
k. Display hinges (see
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Heat sink on page
System board on page
Display assembly on page
Display bezel on page
Webcam on page
Display panel on page
Display panel on page
Display hinges on page
33), and then remove the following components:
48).
System support brackets on page
56).
61).
65).
70).
74).
76).
Display cable and webcam cable on page
76).
72).
Spare part number
938038-001
929442-001
49).
79).
Component replacement procedures 83