Cisco SNS 3515 Manual page 32

Installation of ise software
Hide thumbs Also See for SNS 3515:
Table of Contents

Advertisement

Install the ISE Server
Install ISE 2.0.1 on the Cisco SNS 3515 or 3595 Appliance Remotely Using CIMC
After you have configured the CIMC for your appliance, you can use it to manage your Cisco SNS-3515 or
Cisco SNS-3595 appliance. You can perform all operations including BIOS configuration on your Cisco
SNS-3515 or Cisco SNS-3595 appliance through the CIMC.
Step 1
Connect to the CIMC for server management. Connect Ethernet cables from your LAN to the server, using the ports that
you selected in NIC Mode setting. The Active-active and Active-passive NIC redundancy settings require you to connect
to two ports.
Step 2
Use a browser and the IP address of the CIMC to log in to the CIMC Setup Utility. The IP address is based upon your
CIMC config settings that you made (either a static address or the address assigned by your DHCP server).
The default user name for the server is admin. The default password is password.
Note
Step 3
Use your CIMC credentials to log in.
Step 4
Click Launch KVM Console.
Step 5
Choose Virtual Media > Activate Virtual Devices.
Step 6
Choose Virtual Media > Map CD/DVD to select the ISE ISO from the system running your client browser, and click
Map Device.
Step 7
Choose Macros > Static Macros > Ctrl-Alt-Del to boot the Cisco SNS-3515 or Cisco SNS-3595 appliance using the
ISO image.
Step 8
Press F6 to bring up the boot menu. A screen similar to the following one appears.
Figure 11: Select Boot Device
Step 9
Select the CD/DVD that you mapped and press Enter. The following message is displayed.
Example:
Please wait, preparing to boot........................................................................
...............................................................................................................
Cisco Identity Services Engine Hardware Installation Guide, Release 2.0.1
32
1
Create a Bootable USB Drive
2
Install ISE 2.0.1 on the Cisco 3500 Appliance Using the USB Drive, on page 33
3
Run the Setup Program, on page 35
Install Cisco ISE Software on the SNS 3515 and SNS 3595 Appliances

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sns 3595

Table of Contents