Functions - Siemens SIMATIC ET 200SP Manual

2.2

Functions

PROFINET IO
The interface module supports the following PROFINET IO functions:
● Integrated switch with 2 ports
● Supported Ethernet services: ping, arp, network diagnostics (SNMP)/MIB-2, LLDP-MIB
and MRP-MIB
● Port diagnostics
● Disabling ports
● Minimum update time 125 μs
● Device replacement without programming device, also without topological configuration
● Reset to factory settings via PROFINET IO
● Firmware update via PROFINET IO
● Isochronous real-time communication
● Prioritized startup
● Media redundancy (MRP)
● Media redundancy with planned duplication (MRPD)
● Shared device
● Module division of I/O modules (submodules)
● Module-internal Shared Input/Shared Output (MSI/MSO)
● Isochronous mode as of 125 μs
● Performance upgrade PROFINET V2.3
● Freely selectable connection method and connection technology over SIMATIC
BusAdapter for PROFINET copper, POF, PCF or fiber-optic cables.
The interface module supports additional functions:
● Identification data I&M 0 to 3
● Oversampling
● PROFIenergy
● Configuration control (option handling)
● Value status of I/O modules
● Use of fail-safe modules
● Multi Hot Swap (removal/insertion of multiple I/O modules during operation)
● Reset to factory settings via RESET button
Note
Docking unit
The use of the IM155-6 PN HS interface module as a docking unit (function: IO device
changing in operation) in a docking system is not supported.
IM 155-6 PN HS interface module (6ES7155-6AU00-0DN0)
Manual, 09/2016, A5E34928647-AA
Product overview
2.2 Functions
15