Cisco ASA 5506W-X Hardware Installation Manual page 42

Connect Cables, Turn on Power, and Verify Connectivity
1
3
Figure 28: ASA 5506H-X Cabling
1
3
b) (Optional) Console port – For use with the CLI. Connect a computer or terminal server using a serial console cable
to either the RJ-45 or Mini USB Type B port.
Only one console port can be active at a time. When a cable is plugged into the USB console port, the RJ-45 port
becomes inactive. Conversely, when the USB cable is removed from the Mini USB Type B port, the RJ-45 port
becomes active. See
console port.
c) Gigabit Ethernet ports – For the network interfaces; use standard RJ-45 Ethernet cables.
Step 2
Connect the power cord to the ASA, and plug the other end to your power source.
The ASA 5506-X, 5506W-X, and ASA 5506H-X do not have an on/off switch; the device powers on when you
Note
plug it into a power source.
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
38
Gigabit Ethernet data interface (RJ-45)
Management 1/1 interface (RJ-45)
Gigabit Ethernet data interface (RJ-45)
Management 1/1 interface (RJ-45)
Connect to a Console Terminal or PC, on page 39
2 Console port (RJ-45 or Mini USB Type B)
2 Console port (RJ-45 or Mini USB Type B)
for specific instructions for connecting the
Mount and Connect
Online Only