Install The Asa 5506H-X In A Din Rail - Cisco ASA 5506W-X Hardware Installation Manual

Install the ASA 5506H-X in a DIN Rail

Step 5
Carefully turn the tray right-side up and slide it into the rack-mounted shelf.
What to Do Next
You can now install the cables and power cord, as described in
Connectivity, on page
Install the ASA 5506H-X in a DIN Rail
You can use the 7.5-mm thick 45mm wide top hat DIN rail for the ASA 5506H-X. Secure the DIN rail to the
mounting surface approximately every 7.8 inches (200 mm) and use end-anchors appropriately.
We recommend that you install the ASA 5506H-X on a steel DIN rail for extra stability.
Note
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
34
37.
Mount and Connect
Connect Cables, Turn on Power, and Verify
Online Only