Technical Data - Philips WP3893 User Manual

Symbol LED Description
Power
y
Battery
z
Battery
z
UV UV(Ultra Violet)
Water
b
Filter
c
Dispense
d
Purification stage
e
indicator
Auto
y
11 Technical data
1 UV Lamp: TUV PLS- 9 Watt
2 Power Rating: 30 Watt max
3 Operating Voltage: 230 V±10, 50Hz
4 Input Water Pressure
•
Minimum: 0.5 bar
• Maximum: 2.0 bar
5 Input Water Temperature
•
Minimum: 5°C
•
Maximum: 45°C
6 Output water flow rate: 1.2 lit /min (max)
7 Fuse: Lamp, slow blow
Note:
D
n case the water pressure is above 2 Bar,
pressure regulator/reducer should be used.
Incase the water pressure is below 0.5 bar, use
of a domestic pump is recommended.
Dimensions:
1. Product: 287(L)x156(W)x422mm(H).
2. F Box: 338(L)x207(W)x460mm(H).
Weight: Product
Model WP3892: - 3.8 Kg
Model WP3893: - 4.6 Kg
Colour On/Constant
Green Power On/Standby
Green Fully Charged
(WP3983)
Red Working, on bat-
tery (WP3893)
Red UV-error
Red No water avail-
able( or water
available at pres-
sure below mini-
mum required)
Red Replace filter
Green Water being
dispensed
Red/Yellow/Green Performing purifi-
cation staged
Blue In auto mode
This Philips Pure Water Dispenser conforms
to NsF/ANsI 42 for removal of chlorine and
particulates (removes all classes of particulates
from Class I till Class VI – particle size 0.5µm till
80 µm), NSF/ANSI 53 for the removal of turbidity
and volatile organic chemicals (VOC's). This Pure
Water Dispenser also conforms to NSF/ANSI 53
for the removal of cysts.
This Philips Pure Water Dispenser conforms
to NSF/ANSI 55 Class A for the disinfection of
microbiologically contaminated water that meets
all other public health standards. The system is
not intended for the treatment of water that has
an obvious contamination or intentional source,
such as raw sewage, nor is the system intended
to convert waste water to microbiologically safe
drinking water.
Off
Flashing
Charging
Critical, charging
required
Waiting for water
End stage of filter
life
Manual mode
19