Philips WP3893 User Manual page 13

When do you replace the filter?
1
• The Filter is good to use upto 3000 litres.
Once the Filter crosses the mark of 2700
litres, the Pure Water Dispenser gives you
a Filter warning (Filter LED starts flashing).
You can continue to dispense water
(another 300 litres) during this warning
period but the Filter lED will always
flash as an alert for you, so that you can
arrange for a new filter.
•
Filter life expires once it reaches 3000
litres. In this scenario the Filter lED will
glow constant RED and the Pure Water
Dispenser will not dispense water unless
the Filter is replaced.
Note:
D
• It is recommended to change the filter
after every 6 months even though you
might not have consumed 3000 litres.
Filter life is subject to actual level of
•
impurities in your water supply and thus
might expire before 3000 litres without
any alert/warning.
Switch off the Pure Water Dispenser.
2
Open the door.
3
Pull the filter unit towards you with the help
4
of the lever from its mounted place and
slightly tilt it.
Turn and click open the filter cap.
5
Pull out the combined filter slowly with help
6
of the handle available on the top of the
filter.
Replace it with a new one. Push it down till
7
it fits firmly.
To close the filter cap align the arrow on the
8
cap with the arrow on the filter housing and
press down firmly.
Rotate the cap in a clockwise direction to
9
close.
13