Installation Of Fp-733 Flexible Board - Sony DCR-IP1 Service Manual

DCR-IP1/IP1E

[INSTALLATION OF FP-733 FLEXIBLE BOARD]

Fold
MS-153 board side
FP-733 flexible board
MS-153 board side
2 Engage four claws.
Hinge assembly
FP-733 flexible board
: Fold mark
PD-199 board side
Fold
PD-199
board side
Flexible clamp
4 Mount the flexible clamper
on the hinge assembly.
6 Meet an H-shaped part
of the FP-733 flexible board
with the claws of the hinge assembly.
1 Fold the FP-733 flexible board.
MS-153
board side
Bosses
3 Meeting with the bosses,
5 Wind the FP-733 flexible board
around the hinge assembly in the
arrow A direction.
7 When the FP-733 flexible board
was mounted on the PD-199 board,
bend a slack portion as shown in the figure.
2-10
Fold
: Fold mark
PD-199 board side
Fold
Fold
mount the IC7301 part
on the flexible clamper.
A
claws