Table of Contents
Advertisement
WWW.FREESERVICEMANUALS.INFO
2-4. CABINET (F) BLOCK ASSEMBLY-2
1 Screw
(M1.7 × 2.5),
EG grip (black)
7 Cabinet (F) block assembly
2-5. EVF COVER ASSEMBLY (FP-539 BOARD)
1 Open the Jack hinge assembly.
REMOVING THE FP-539 BOARD
1 Two tapping screws
(M1.7 × 3.5)
3 FP-539 board
3 Remove the Cabinet (F) block assembly
in the way of twisting it
in the direction of the arrow A .
A
6 FP-542 flexible board
(39P)
Caution
2 EVF cover assembly
Worlf of free manuals
12/2
2 Open the Jack cover.
4 Turn over the
Prevention sheet.
2 Two screws
(M1.7 × 2.5),
EG grip (silver)
5 FP-539 board
(6P)
2-5
WWW.NOSTATECH.NL
DCR-IP210/IP210E/IP220/IP220E
Caution
The power supply capacitor of the Flash unit is
charged to the voltage as high as 300 V at a
maximum. The high voltage is not discharged
even after the main power of the machine is
simply turned off and the charged potential still
remains.
Discharge the residual voltage by referring to
Service Note (page 1-2).
Power supply
capacitor
TP4201
5
Shorting jig
(1k Ω / 1w)
LND421
4 Three claws
6 EVF cover assembly
3 Claw
ST-076 board
Advertisement
Table of Contents
