Cisco IR829 Hardware Installation Manual page 42

Installing the Router
Hot surface. Statement 1079
Warning
High Temperature SIMs are required for 4G operations if the Ambient temperature is above 95F (35C)
Note
To access the SIM card in the Cisco IR829, follow these steps:
Step 1 Place the router on its bottom and ensure that any installed antennas are carefully oriented.
Step 2 Remove the SIM access panel using two Phillips head screws. (See
Step 3 Locate the SIM card you wish to install/replace. Details are shown in
Remove the SIM card (if present) and install the new card(s).
Step 4
Figure 2-1
Figure 2-2
1.
2.
3.
Replace the panel and the screws.
Step 5
Cisco IR829 Integrated Services Router Hardware Installation Guide
2-4
Accessing the SIM Cards
Sim Card Detail
Reset Switch
Mini USB Port
Dual Sim Slots
Chapter 2 Installing the Router
Figure 2-1.)
Figure 2-2.