Special Programming Mode (Spm); Edit The Channel Scan List - Motorola GP68 Service Manual

Radio Programming Information

Special Programming Mode (SPM)

Display Shows:
†
xxx
NOTE
You can use the procedure for If no Option
Boards were Installed in the Dealer's
Radio if the option board does not have any
interaction with the programming procedure.
• Disable any installed option boards via the Option
Board Setup Mode by selecting 'OPt.OFF'.
• Perform all necessary programming functions,
including default radio settings, channel settings, and
phone numbers.
• Select the appropriate option board setting for the
User's radio via the Option Board Setup Mode.
• Perform any programming of DTMF Selective Call
IDs (if necessary), and configure SPM defaults.
• Clone the programmed settings over to the user
radios.
Special Programming Mode (SPM)
See Figure 4-20.
4-10
Special Programming Modes
Description:
Edit Channel Scan List
Erase Single Channel
Edit Phone Access Code
Edit Phone De-access Code
Edit Time Out Timer
Edit PTT ID
Edit Acknowledgment ID
Edit Individual Call ID
Edit Group Call ID
Edit All Call ID
Set SelCall Tone Status
Set Sidetone Status
Set Alert Tone Volume
Set Battery Saver Status
Set Battery Type
Set Accessory Option
Figure 4-20 Special Programming Modes
6881086C09-O
USER DEALER SEL CAL DECODE SERIAL
X X X
X X
X X X
X X X
X X X
X X
X
X X X
X X X
X X X
X X X
X X X
In addition to the parameters accessible by
the user, the Dealer's Radio allows you to
access additional parameters of the radio.
These are: Erase Single Channel, Edit PTT
ID, *Edit Acknowledgment ID, *Edit Indi-
vidual Call ID, *Edit Group Call ID, and
*Edit All Call ID. (* Only if DTMF Option
Board is selected in Option Board Setup
Mode). The Special Programming mode also
provides a Factory Reset feature which
allows you to return certain user-modifiable
parameters in the radio to the factory-default
values (IDs and access/de-access codes are
unaffected by this programming feature).

Edit the Channel Scan List

1 Rotate the Channel Selector Knob to select the
menu item.
Use or to scroll through the channels (01 to
2
20).
A invalid keypress tone sounds when you have
reached the upper or lower limit of the channel
scan list.
GP68 Portable Radios Service Manual
X X
X X
X X
X X
X X
X X
X
X
X
X
X X
X X
X X
X X
X X
X X
NOTE
March, 1997