Programming Mode; Introduction; Entering Programming Mode; Exiting Programming Mode - Motorola GP2000 Service Manual

4-4
4.0

Programming Mode

4.1

Introduction

This mode allows you to edit a number of features to enhance the use of this radio.
4.2

Entering Programming Mode

If the radio is turned on, turn it off. Press and hold the MON, and turn on the radio. A ringing tone is
heard, which indicates that the radio is in Programming Mode. The K indicator is displayed.
4.3

Exiting Programming Mode

To exit Programming Mode, turn off the radio.
4.4

Accessing Programming Mode Parameters

In Dealer ConÞguration, Programming Mode parameters are grouped into three main categories:
RW (Radio Wide), Channel (001 to XXX
Use + or - buttons, to move from one category to another.
NOTE: Radio operating in User ConÞguration is only restricted to RW parameters.
Once you have selected the category, and wish to view its parameters, use PTT or MON to move
from one parameter to the other, as shown in the next diagram.
1. XXX denotes the maximum number of channels supported by your radio model.
RW ßà CH 001 ßà CH 002 ßà É ßà CH XXX
1
) and VFO (Variable Frequency Operation).
Programming Mode
1 ßà VFO