Utilities; Program Serial No; Front Panel Feature And Button Configuration Mode; Introduction - Motorola CP185 Basic Service Manual

5-12
5.7

Utilities

5.7.1

Program Serial No.

The Program Serial No. option under the Utilities heading allow the radio serial number to be
programmed. However, the serial number of a particular radio can only be programmed if it was
originally blank. Only New Service Boards have a blank serial number. Once a new serial number is
programmed into the board, it is NO longer changeable. If the serial number of the radio is not blank,
access to the screen will be denied. The serial number programming screen is shown in
Figure 5-11. Program Radio Serial No. Window. For the new radio serial number to take effect, close
the screen and then read the radio again.
5.8

Front Panel Feature and Button Configuration Mode

5.8.1

Introduction

This mode allows you to change the feature parameters to enhance the use of your radio.
Note Please use the CPS to program additional setting on the radio.
5.8.2

Entering Programming Mode

Make sure the radio is turn off. Press Side Programmable Button 1 (top side programmable button),
and turn ON the radio. A tone is heard, indicating that the radio is in Programming Mode. The
indicator illuminates and the "BCKLIGHT" is displayed on the radio LCD.
5.8.3

Exiting Programming Mode

Turn off the radio to exit Programming Mode.
5.8.4

Accessing Front Panel Programming Mode Parameters

Press
Press PTT to select the menu or sub-menu item, or

Figure 5-11. Program Radio Serial No. Window

or to scroll through the parameters for each menu or sub-menu item, or
Radio Programming and Tuning: Utilities