System Reset - Schlage S-6800 User Manual

System
Reset
The unit can be reset to its factory settings by following these steps
Open battery
cover
While holding down
both the 10KEY and R/C
buttons, insert battery 1,
followed by battery 2
Press #
Remove batteries
1 and 2
Input manager code e.g. 456789, or touch manager card
Factory settings
Manager code
Manager card/fob
PIN codes
Cards/fobs
Fingerprints
Sound volume
Auto/manual locking
Suspend code/card/fi ngerprint
NOTE
To reset the system, the unit must be in safety mode (see p.18).
Press open button to
remove remaining charge
Deleted
Deleted
Deleted
Deleted
Deleted
7
Manual
Released
16.