Installing The Switch In A Standard 19" Rack - D-Link DGS-3000 series Hardware Installation Manual

DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide
Figure 2–1 Attaching rubber feet to the Switch
Install the Switch on a sturdy, level surface that can support at least 3kg (6.6lb). Do not place heavy objects on the
Switch.

Installing the Switch in a Standard 19" Rack

The Switch can be mounted in a standard 19" rack using the rack-mount brackets included in the package. Use the
following diagrams as a guide.
Figure 2–2 Attaching rack-mount brackets to the Switch
Fasten the rack-mount brackets to the Switch using the screws provided. With the brackets attached securely, the
Switch can be mounted in a standard 19" rack, as shown below.
18