Console Cable; Redundant Power Supply (Rps) Cable - D-Link DGS-3000 series Hardware Installation Manual

Console Cable

When connecting the Switch to a PC, a Console cable is necessary. The following diagrams and tables show the
standard Console-to-RJ45 receptacle/connector and their pin assignments.
Console-to-RJ45 PIN Assignments:
Pin
1
2
3
4
5
6
7
8

Redundant Power Supply (RPS) Cable

When connecting the Switch to an RPS, an RPS cable is necessary. Please review these products for matching cable
pin assignment. The following diagrams and tables show the DPS-CB150-2PS receptacle/connector and their pin
assignments.
DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide
Figure B–2 Console-to-RJ45 Cable
Console (DB-9/RS-232)
Not Used
RXD
TXD
Not Used
GND (shared)
Not Used
Not Used
Not Used
45
RJ45
Not Used
Not Used
TXD
GND
GND
RXD
Not Used
Not Used