L2Tp - D-Link AC1200 User Manual

Section 3 - Configuration
Address Mode: Choose Static IP only if your ISP assigns you an IP address.
Otherwise, choose Dynamic IP.
L2TP IP Address: Enter the information provided by your ISP (Only applicable for
Static IP L2TP).
L2TP Subnet Enter the information provided by your ISP (Only applicable for
Mask: Static IP L2TP).
L2TP Gateway IP Enter the information provided by your ISP (Only applicable for
Address: Static IP L2TP).
L2TP Server IP Enter the IP address of L2TP server.
Address:
Username: Enter the User/account name provided by your ISP for L2TP.
Password: Enter the password provided by your ISP for L2TP.
Verify Password: Re-enter your password for verification.
Choose Always-on when you want to establish L2TP connection
Reconnect
all the time. If you choose Connect-on-demand, the device will
Mode:
establish a L2TP connection when local users want to connect
to the Internet, and disconnect if there is no traffic after the time
period defined by the Maximum Idle Time setting.
Maximum Idle Enter an idle time in seconds before your L2TP session is
Time: automatically disconnected. To disable this feature, set the timer
to zero or choose Always-on.
D-Link DWR-118 User Manual

L2TP

16