Wi-Fi Advanced - D-Link AC1200 User Manual

Section 3 - Configuration
These settings are intended for advanced users or network professionals only and should not be necessary for normal operation. Improper
configuration may impact performance. Select the appropriate settings for each frequencies.
Beacon Interval: Specify a value for the beacon interval. Beacons are packets sent
by an access point to synchronize a wireless network. 100 is the
default setting and is recommended.
Transmit Power: Set the transmit power of the antennas.
RTS Threshold: This value should remain at its default setting of 2347. If
inconsistent data flow is a problem, only a minor modification
should be made.
Fragmentation: The fragmentation threshold, which is specified in bytes,
determines whether packets will be fragmented. Packets
exceeding the threshold will be fragmented before transmission.
2346 is the default setting.
DTIM Interval: Set the interval for DTIM. A Delivery Traffic Indication Message
(DTIM) is a countdown informing clients of the next window for
listening to broadcast and multicast messages. The default interval
is 1 for 2.4 GHz networks, and 3 for 5 GHz networks.
WMM Capable: WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for
your wireless network. Enable this option to improve the quality of
video and voice applications for your wireless clients.
TX Rates: Select transfer rates based on the speed of wireless adapters on
your wireless network. It is strongly recommended to keep this
setting to Best.
D-Link DWR-118 User Manual

Wi-Fi Advanced

34