Pppoe - D-Link AC1200 User Manual

Section 3 - Configuration
Username:
Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password in the
next box.
Service Name: Enter the ISP Service Name (optional).
MTU: Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP.
Select either Obtain DNS server address automatically or Use
DNS Setting:
the following DNS address.
If you selected Use the following DNS address, enter the primary
DNS Addresses:
and secondary DNS server addresses.
Enable DHCP-PD:
Check to enable the DHCP-PD feature.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
Enable Check to enable the autoconfiguration feature.
Autoconfiguration:
Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless
Autoconfiguration
Type: DHCPv6.
Router Enter the IPv6 address lifetime (in seconds).
Advertisement
Lifetime:
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-118 User Manual

PPPoE

28