Checking The Configuration - Huawei S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Context
Do as follows on the S9300 where information needs to be output to the log host:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center loghost ip-address [ channel { channel-number | channel-name } |
facility local-number | language { chinese | english } ]
Information is output to the log host.
Step 3 Run:
info-center loghost source interface-type interface-number
The source address that sends log information is configured.
----End

2.4.8 Checking the Configuration

Context
Run the following command to check the previous configuration.
Procedure
l
----End
Example
Run the display info-center statistics command. If the statistics are output from the information
center to the destination terminal, it means that the configuration succeeds.
<Quidway> display info-center statistics
Information statistics data:
ModuleID
417d0000
41470000
406c0000
40ef0000
ff0d0000
41440000
41a40000
40e70000
41a90000
ff040000
ff020000
41980000
416e0000
41860000
419d0000
Issue 02 (2009-08-06)
Run the reset info-center statistics command to clear the statistics in the information
center.
ModuleName LogNumber
6OVER4 0
AAA 0
ACL 0
ACL6 0
ACLE 0
ACM 0
ADA_BFD 0
ADDR 0
ADPPINGF 0
ALMA 16
ALML 18
APS 0
ARP 51
ARP-PING 0
ARPLINK 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
TrapNumber DebugNumber
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
*
2-15